How to solve common faults of elevators in the production equipment of strong dispersing machine and grout? Nowadays, more and more production and processing companies are using strong dispersers. They usually do not understand the equipment during normal application, resulting in common equipment failures. Now, Senbo has grasped the situation reflected by customers and summarized common fault solutions.

1. The length of the V-belt should be the same, and when placed in the gearbox, the tightness level of the V-belt should be moderate. When tightening the double rocker anchor bolts, remember to cover them.

2. Once the machine equipment is not used for a long time, the switch power supply should be immediately disconnected to keep the equipment clean, and oil should be dripped to the areas that need lubrication. The main shaft bearings and hydraulic cylinders should also be regularly oiled and rust proofed.

3. On average, it needs to be replaced every six months, and the car fuel tank needs to be cleaned. The filter screen needs to be cleaned once a month, and it needs to be cleaned again within two to three days after changing the oil.

4. The rotating part of the production equipment for strong dispersing machine grout should be dripped once a week. If overheating or abnormal noise is detected during application, immediate inspection should be carried out.

The production equipment of strong dispersing machine grout should be inspected on time for its spare parts, and if any damage is found, it should be replaced immediately. In the application of machinery and equipment, maintenance should be carried out once a year as much as possible, and the DC contactor should be inspected every six months.