The strong dispersing machine for the production of grout is an intelligent dispersing machine equipment that has undergone practical experience. This equipment can have various dispersion methods and carry out different dispersion, crushing, and mixing of various raw materials. So, let's take a look at the key blades of this equipment together!

The strong disperser and grout production equipment are divided into low-speed and high-speed mixing equipment. The equipment has two high-speed dispersing paddles and a low-speed mountain shaped (more commonly) scraping edge and bottom paddle, which can be said to have no dead center dispersion. Therefore, when customizing various raw materials, it is necessary to select the blade method. There will be the following types of blades:

1. Push type mixing and dispersing machine for producing grout

Push type agitators are composed of three propeller blades in a spiral shape, similar to the propellers of propeller type aircraft on ships. They are generally used for raw materials that require strong mixing due to chemical changes and low viscosity. A more suitable reflection management system for turbid liquids or mixed liquids with small amounts of solids. The speed ratio is generally 300-600r/min.

2. Paddle type mixing and dispersing machine for producing grout

A paddle mixer is a simple type of stirrer. Easy production and manufacturing, low power consumption for mixing output. Generally divided into vertical blade agitator (also known as "one" - shaped agitator) and folded blade agitator. A reflection management system applicable to two low viscosity miscible liquids. The speed ratio is generally between 20-80r/min (commonly used in low-speed mixing, paint coloring, and other places, with a constant speed).

3. Pressure boosting mixing and dispersing machine, equipment for producing grout

A pressurized mixer is a suitable mixer used in the reflection management system that requires very strong mixing. Pressure boosting mixers can be divided into vertical blade type, curved blade type, folded blade type, disc-shaped vertical blade type, and disc-shaped curved blade type. For liquids with high viscosity or density differences, mixed liquids with high concentration solid particles and their vapors must be adequately dispersed in the liquid to reflect the management system. Generally, a pressurized stirrer is used. The speed ratio is generally between 200-1000r/min. (Commonly found in places where high-speed dispersion and depolymerization by dispersers are required)

4. Strip or anchor type mixing and dispersing machine for producing grout

Strip mixing and anchor mixing belong to the same type of mixing, and the main difference between them is their appearance. When used for mixing liquids, the density difference between the solid and liquid should not be too large. The speed ratio is generally 15-60r/min (this type of agitator is generally used in places with high viscosity, such as similar mud like raw materials, with little fluidity, and has high requirements for the output power of the disperser. Due to the need for a high torque motor for low-speed high viscosity raw materials to ensure that the current does not exceed the limit, it is not easy to burn out the motor due to insufficient torque or rated power).